PWS ID Number: TX229001 PWS Name: CITY OF WOODVILLE
The CITY OF WOODVILLE provides Ground Water from the Jasper Aquifer located in Tyler County.
Annual Water Quality Report for the period of January 1 to December 31, 2023
Our Drinking Water Meets or Exceeds All Federal (EPA) Drinking Water Requirements
This report is a summary of the quality of the water we provide our customers. The date presented in the following pages is from the most recent EPA required tests. We hope this information helps you become more knowledgeable about what is in your drinking water.
This report is intended to provide you with important information about your drinking water and the efforts made by the water system to provide safe drinking water.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPAs Safe Drinking Water Hotline at (800) 426-4791.
For more information regarding this report contact:
Name: Charles Odom, Public Works Director
Phone: (409) 283-2234
Este reporte incluye información importante sobre el agua para tomar. Para asistencia en español, favor de llamar al telefono (409) 283-2234
Public Participation Opportunities
Date: 2nd Monday Each Month
Time: 6:00 pm
Location: City Hall, 400 W. Bluff St.
Phone Number: (409) 283-2234
Special Notice:
You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly, or immuno-compromised persons such as those undergoing chemotherapy for cancer; persons who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders, can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care providers. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline (800-426-4791).
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We are responsible for providing high quality drinking water, but we cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.
Information on Sources of Water:
The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pickup substances resulting from the presence of animals or from human activity.
Contaminants that may be present in source water include:
- Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
- Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
- Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.
- Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.
- Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities
Information about Secondary Contaminants
In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health.
Contaminants may be found in drinking water that may cause taste, color, or odor problems. These types of problems are not necessarily causes for health concerns. For more information on taste, odor, or color of drinking water, please contact the system's business office.
Information about Source Water Assessments
CEQ completed an assessment of your source water, and results indicate that some of our sources are susceptible to certain contaminants. The sampling requirements for your water system is based on this susceptibility and previous sample data. Any detections of these contaminants will be found in this Consumer Confidence Report. For more information on source water assessments and protection efforts at our system contact Charles Odom, Public Works Director at (409) 283-2234.
Further details about sources and source water assessments are available in Drinking Water Watch at the following URL: http://dww.tceq.texas.gov/DWW/
Source Water Name
Type of Water
Status
Aquifer
5 – SIMS ST
SIMS ST
GW
Active
Jasper
6 – GIBB LEWIS
GIBB LEWIS
GW
Active
Jasper
7 – CARLOW RD RD
CARLOW RD
GW
Active
Jasper
8 – CR 3020
CR 3020
GW
Active
Jasper
9 – PINE ST
PINE ST
GW
Active
Jasper
Water Quality Test Results
Definitions:
The following tables contain scientific terms and measures, some of which may require explanation.
Action Level:
The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
Avg:
Regulatory compliance with some MCLs are based on running annual average of monthly samples.
Level 1 Assessment:
A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why total coliform bacteria have been found in our water system.
Level 2 Assessment
A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our water system on multiple occasions.
Maximum Contaminant Level or MCL:
The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.
Maximum Contaminant Level Goal or MCLG:
The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
Maximum residual disinfectant level or MRDL:
The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.
Maximum residual disinfectant level goal or MRDLG:
The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.
MFL
million fibers per liter (a measure of asbestos)
mrem:
millirems per year (a measure of radiation absorbed by the body)
na:
not applicable.
NTU
nephelometric turbidity units (a measure of turbidity)
pCi/L
picocuries per liter (a measure of radioactivity)
ppb:
micrograms per liter or parts per billion - or one ounce in 7,350,000 gallons of water.
ppm:
milligrams per liter or parts per million - or one ounce in 7,350 gallons of water.
ppq
parts per quadrillion, or picograms per liter (pg/L)
ppt
parts per trillion, or nanograms per liter (ng/L)
Treatment Technique or TT:
A required process intended to reduce the level of a contaminant in drinking water.
Lead and Copper
Lead and Copper
Date Sampled
MCLG
Action Level (AL)
90th Percentile
# Sites Over AL
Units
Violation
Likely Source of Contamination
Copper
2023
1.3
1.3
1.01
1
ppm
N
Erosion of natural deposits; Leaching from wood preservatives; Corrosion of household plumbing systems.
Lead
2023
0
15
0
1
ppb
N
Corrosion of household plumbing systems; Erosion of natural deposits
Regulated Contaminants
Inorganic Contaminants
Collection Date
Highest Level Detected
Range of Levels Detected
MCLG
MCL
Units
Violation
Likely Source of Contamination
Arsenic
2023
2.3
0 - 2.3
0
10
ppb
N
Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes.
Barium
2023
0.158
0.12- 0.158
2
2
ppm
N
Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits.
Fluoride
2023
0.22
0.14 - 0.22
4
4.0
ppm
N
Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories.
Radioactive Contaminants
Collection Date
Highest Level Detected
Range of Levels Detected
MCLG
MCL
Units
Violation
Likely Source of Contamination
Beta/photon emitters
05/05/2022
4.7
0 - 4.7
0
50
pCi/L*
N
Decay of natural and man-made deposits.
*EPA considers 50 pCi/L to be the level of concern for beta particles.
Gross alpha excluding radon and uranium
05/05/2022
3.1
0 - 3.1
0
15
pCi/L
N
Erosion of natural deposits.
Disinfectant Residual
Year
Avg. Qtrly Level
Range of Levels
Highest Result
MRDL
MRDLG
Units
Violation
(Y/N)
Source in Drinking Water
Chlorine
2023
1.63
0.52 - 2.17
4
4
ppm
N
Water additive used to control microbes.
Violations
Lead and Copper Rule
The Lead and Copper Rule protects public health by minimizing lead and copper levels in drinking water, primarily by reducing water corrosivity. Lead and copper enter drinking water mainly from corrosion of lead and copper containing plumbing materials.
Violation Type
Violation Begin
Violation End
Violation Explanation
FOLLOW-UP OR ROUTINE TAP M/R (LCR)
01/01/2023
07/24/2023
We failed to test our drinking water for the contaminant and period indicated. Because of this failure, we cannot be sure of the quality of our drinking water during the period indicated.
LEAD CONSUMER NOTICE (LCR)
04/01/2023
08/02/2023
We failed to provide the results of lead tap water monitoring to the consumers at the location water was tested. These were supposed to be provided no later than 30 days after learning the results.
Public Notification Rule
The Public Notification Rule helps to ensure that consumers will always know if there is a problem with their drinking water. These notices immediately alert consumers if there is a serious problem with their drinking water (e.g., a boil water emergency).
Violation Type
Violation Begin
Violation End
Violation Explanation
PUBLIC RULE LINKED TO VIOLATION
12/11/2022
08/11/2023
We failed to test adequately notify you, our drinking water consumers, about a violation of the drinking water regulations.